PRE-APPLICATION Before you begin any nail application, be sure to follow the 6 steps listed below: • Sanitize your hands and clients' hands. • Remove any trace of nail lacquer if any. •. Perform a dry manicure by gently pushing back the cuticle, removing the excess cuticle (pterygium) with a cuticle nipper. • Using a 180 grit File, shape the nail and lightly buff the shine from the nail plate. • Remove the filing dust with a clean SuperNail Cleansing Wipe. • Apply 1 coat of ProDip Prep to each finger and allow it to dry. APPLICATION • Select desired colours of ProDip Powders and pour into disposable dipping trays, use separate trays for each colour. • Apply 1 coat of ProDip Prep to each finger and allow it to dry. • Apply a coat of ProDip Base to the entire nail of the pinkie and carefully slide finger forward into the white powder to create a crisp smile line. Immediately dip entire finger into the pink or clear ProDip Powder in the other tray and tap off excess. Repeat the above step on all ten nails. • Gently dust off excess powder with a dry Lint Free Cleansing Wipe. • Repeat the dipping process on all ten nails making sure your smile lines are crisp and firmly close the ProDip Base cap. • Gently dust off excess powder with a dry SuperNail Cleansing Wipe. • Apply a generous amount of ProDip Activator to all ten nails making sure to cap the free edge. • File and shape all nails with a 180-grit File and buff smooth. • Using a dry SuperNail Cleansing Wipe, remove dust from all nails making sure no dust particles are left on the nail. • Re-apply the ProDip Activator on all ten nails. • IMPORTANT: Without pausing between fingers, apply a coat of the ProDip Finish Gel to one hand only and immediately apply a second coat of ProDip Finish Gel to that same hand. Do not over brush the second coat, limit to three strokes per nail. • Repeat the above step on the other hand. • Let the Finish Gel dry for 2 minutes before applying ProDip Cuticle Oil REMOVAL • Remove the shine from the nail surface using a 180-grit file. • Soak a cotton ball or pad with acetone and wrap in foil, leave it on the nails for 10 minutes. • After the ten minutes, remove the foil and with the cotton, press and remove the product off of the nail. The product should have a gummy consistency and should be removed easily. • File and buff any remaining product.

Ethyl acetate, Dimethyltolylamine